Tighten into position.

Turn the Moose Tube in a clockwise direction to tighten.

#Note:- Moose Tubes do not have to be excessively tightened to maintained their grip and stay in position.

Installing Drone Valves or Fitting to Moisture Control System.

The clear tubing section of the Moose Tubes can be simply trimmed using a sharp knife.

This will allow easy fitting of Hylands In-Line Drone Valves or fitting to other brand of moisture control system.

Replacing other tubes with Moose Tubes.

Other brands of tubes are fitted with different connectors such as push in fittings or rubber cups which involves extracting the stock from the bag to fit

To remove these, simply cut the tubes off at the stock with a sharp knife and trim around the rubber to expose the hole.

There is no need to remove the stock until next time you need to change a bag!